Post-Construction Cleaning Redding CA

The contractors are gone, the paint is dry, and the house still is not ready. Fine drywall dust has settled on every surface and inside every cabinet, there is sticker residue on the new appliances, and the floors are covered in a film no broom will lift. Our post-construction cleaning Redding CA service takes a remodel or new build from job-site dusty to move-in ready — dust out of the details, residue off the fixtures, and floors finished last.

We work for homeowners finishing a remodel, builders handing over a new home, and property managers preparing a renovated unit. The scope is built on our deep-clean work, with the dust and residue that construction leaves behind.

What’s Included in a Post-Construction Clean

Drywall dust is the main problem, and it gets everywhere air gets. We remove dust from walls, trim, light fixtures, ceiling fans and vents, then work through windows and tracks, cabinet interiors and exteriors, and every shelf and sill. Paint splatter and sticker residue come off fixtures, appliances and glass. Countertops, sinks and bathroom surfaces are cleaned and sanitised, and floors — vacuumed, then mopped — are finished last, so dust from the higher work does not settle on a clean floor.

Interior windows and tracks are part of the clean. For exterior glass, or for windows that need a full wash after construction, our window cleaning service covers that separately. The order matters: dust settles downward, so we always work top to bottom and finish with the floors.

Rough Clean and Final Clean

Most jobs need two passes. A rough clean happens mid-project, after the dusty trades are done but before the final fixtures go in — it clears the bulk of the dust so the finishing work starts clean. The final clean happens at the end, once every trade has finished, and it is the detail pass: every surface wiped, every cabinet interior done, residue removed and floors finished, so the space is ready for move-in or listing photos.

If you are listing the home, book the final clean for the day before photos. If you are moving in, book it for the day before the movers arrive — the same rule as a move-out clean: clean the empty house once, properly, before anything goes in.

Why Post-Construction Cleaning Is Deep-Clean Work

A standard clean maintains a clean home. A post-construction clean resets a dirty one, which is why it is priced and staffed like a deep clean: baseboards, grout, fans, vents and appliance interiors, plus the construction-specific work of dust and residue. The same detail applies — dust hides in the places a quick wipe never reaches, like the top of a door frame, the inside of a cabinet hinge, or the track of a sliding door.

We bring HEPA vacuums, which matter here more than anywhere: drywall dust is fine enough to pass through a standard vacuum filter and settle again. Surfaces are wiped, not just dusted, because dry dusting moves fine dust around instead of removing it. And we plan for a second wipe on the worst surfaces — dust that was airborne during the first pass settles while we work, and the final pass catches it.

What It Costs

Post-construction cleans are quoted per job, after a walkthrough or photos, because dust levels vary so much between a one-room remodel and a full new build. The quote is based on square footage, the number of rooms and bathrooms, and how much dust and residue is left — and the flat price is the price you pay.

As a reference, a deep clean of a 3 bed 2 bath home in Redding runs $300 to $450, and a deep clean of a 4 bed home runs $400 to $550. A post-construction clean of a similar-size home is usually in that range when the job is a single final clean, and higher when it needs a rough clean as well. Full deep-clean ranges by home size are on our cleaning prices page.

What We Don’t Handle

We clean; we do not remove hazardous materials. Asbestos, lead paint and mould remediation need a licensed abatement specialist, and we will tell you if we see something that needs one. We also do not haul construction debris — the builder or a hauling service clears the rubble, and we clean what is left. And we do not handle clinical or biohazard cleaning. If your job includes any of those, say so when you call and we will be straight about what we can and cannot do.

How to Book

Call (530) 201-4234 and tell us what was built or remodelled, the size of the space, and when the last trade finishes. Most jobs can be quoted from photos of the rooms; larger jobs get a quick walkthrough. Our commercial cleaning team handles post-construction work for offices and retail spaces on the same basis.

Cleaning Services Redding — 1860 Canby Rd, Redding, CA 96002 · (530) 201-4234 · Mon–Sat 8am–6pm. Call for a flat quote on post-construction cleaning in Redding, CA.

When should I schedule the final clean?

After the last trade has finished and before move-in or listing photos. Book it for the day before the movers or the photographer arrive, so the house is empty and clean.

What is the difference between a rough clean and a final clean?

A rough clean happens mid-project and clears the bulk of the dust so finishing work starts clean. A final clean happens at the end and is the detail pass — every surface, cabinet interior and floor, ready for move-in.

Are windows included?

Interior windows and tracks are part of the clean. Exterior windows and a full window wash are covered by our window cleaning service.

Do you remove paint from floors and fixtures?

Yes. Paint splatter and sticker residue are cleaned off fixtures, appliances and glass as part of the final clean.

Do you haul away construction debris?

No. The builder or a hauling service clears rubble and large debris; we clean the dust, residue and floors that are left behind.

How long does a post-construction clean take?

It depends on the size of the job and how much dust is left. A single-room remodel is usually a few hours; a full new build can take a full day or more. The quote includes a time estimate.